51福利社

March 2026

Risk Management Monthly Newsletter
March 2026

1. RPT Usage

Wondering what an RPT is? RPT stands for relocatable power tap, commonly known as a power strip. These devices are used throughout campus and can present a fire hazard when improperly selected or used.

The variety of power strips used across campus creates risk because some models lack safety features that help prevent overheating. Environmental Health & Safety recommends using quality surge-protected units intended for office environments.

Safe RPT Practices

  • No daisy-chaining with other RPTs or extension cords.
  • Plug directly into wall outlets.
  • Keep off the floor whenever possible.
  • Avoid use with refrigerators, microwaves, coffee pots, and space heaters.
Proper use of power strips can significantly reduce electrical and fire hazards.

2. Hazard Communication

Hazard communication signs and labels are important safety tools. Understanding hazards allows employees to prevent unnecessary exposures and injuries.

Commercial products, university equipment, and hazardous materials should be labeled according to GHS standards. Safety Data Sheets (SDSs) should be available for hazardous materials.

  • Report unlabeled hazardous materials.
  • Replace faded labels or notify your supervisor.
  • Review SDS information before use.
  • Learn hazards associated with new chemicals or processes.
  • Follow required safety precautions.
Know the Hazard. Read the Label. Review the SDS.

3. Slips, Trips, and Falls

Slips, trips, and falls are common workplace incidents but many can be prevented through awareness and safe work practices.

  • Pay attention while walking.
  • Watch for stairs, curbs, speed bumps, and uneven surfaces.
  • Use ladders correctly and follow manufacturer instructions.
  • Exercise caution in parking lots.
  • Use handrails when using stairs.
  • Allow sufficient time and avoid rushing.
  • Avoid cellphone use while walking.
  • Report unsafe conditions.
Stay Aware. Slow Down. Prevent Injuries.
SAFETY CORNER

Take a Moment to Look Around

Many workplace incidents occur because hazards are overlooked. A brief safety review of your surroundings can help prevent injuries and property damage.

  • Check walkways for trip hazards.
  • Look for damaged cords or overloaded outlets.
  • Verify hazardous materials are labeled.
  • Keep exits clear.
  • Report unsafe conditions promptly.
See Something. Report Something. Prevent an Incident.
Risk Management Monthly Newsletter | March 2026

Next Steps